Saturday, May 8, 2010

Setting Rivets Part 2

After setting each rivet I used the rivet go/no go gauge to insure I set it properly. The gauges are pretty handy to have and help you, the builder, to keep your rivets uniform & right.









Here is a nice row of rivets set with the riveting gun and to proper size. It took about 3 minutes to set. The lens cap is to give some perspective on size.







This is the flap spar & doubler assembly. I used the hand squeezer to set these rivets. I had to extend the squeezers handles to get enough leverage to squeeze the heads. This took a couple of hours to set!

No comments:

Post a Comment